LP Series Reverse Osmosis Element
-
Low pressure (2/3 of traditional membranes)
-
High salt rejection up to 99.5%
-
High flow up to 10,500 GPD (≈39.7 m³/day)
-
Suitable for TDS < 2,000 mg/L (surface/ground/tap water)
-
Industrial applications: chemical, pharma, food, electronics, boilers
Description
LP Series Reverse Osmosis Element
Characteristics of product:
LP series Reverse Osmosis membrane element is developed for desalination of surface water and ground water featuring low pressure operation, high product water output, high salt rejection,etc. With lower operation pressure, it can achieve same high flux and high rejection rate as traditional low pressure membrane element. Its operation pressure is about 2/3 that of traditional low pressure membrane while rejection rate is approximately
99.5%. It is mainly used in the purification of source water with TDS less than 2,000 mg/L like surface water, ground water, and municipal tap water. Main applications of LP series include large-scale chemical industry, pharmaceutical industry, food and beverage industry, power plant, ultra-pure water used in electronic industry, boiler feed water as well as desalination and purification of municipal water.
Product specifications:
|
Model no. |
Active membrane area |
Feed channel spacer |
Product water output | Stabilized salt rejection | Minimum salt rejection |
| Ft2(m2) | (mil) | GPD (m3/d) | (%) | (%) | |
| LP-8365 | 365 (33.9) | 31 | 9500 (35.9) | 99.5 | 99.2 |
| LP-8400 | 400 (37.2) | 31 | 10500 (39.7) | 99.5 | 99.2 |
| LP-4040 | 85 (7.9) | 31 | 2400 (9.1) | 99.5 | 99.2 |
| LP-4021 | 38 (3.5) | 28 | 1000 (3.8) | 99.2 | 99.0 |
| LP-2521 | 14 (1.3) | 28 | 300 (1.3) | 99.1 | 98.5 |
| LP-2540 | 28 (2.6) | 28 | 750 (2.84) | 99.1 | 98.5 |
1) The stated performance is initial data taken after 30 minutes of operation based on the following conditions:
1500 ppm NaCl, 150psi (10.3 bar) 25℃, pH 7.5, 15% recovery.
2) Permeate flow rate for individual elements may vary with tolerance within 15%.
